GB 20044-2012 Translated English of Chinese Standard. GB20044-2012: Electrical Accessories - Portable Residual Current Devices without Integral Overcurrent Protection for Household and Similar Use (PRCD) [Buy--download True-PDF in 3-second: https://play.google.com/books > Sign in > This BOOK > "3-dots" > Export > Save as "*.pdf"]https://www.chinesestandard.net, 13/03/2018 - 108 páginas This standard specifies the classification, characteristics, marking and product information, standard conditions for operation and installation in service and for installation, requirements for construction and operation and tests of portable devices for household and similar uses. This standard applies to PRCDs, consisting of a plug, a residual current device (RCD) and one or more socket-outlets or a provision for connection, functionally independent of, or functionally dependent on, line voltage. They do not incorporate overcurrent protection. They are intended for single-phase circuits for rated currents not exceeding 16A for rated voltages not exceeding 250V a.c. They are intended to provide protection against shock hazard in case of direct contact, in addition to the protection provided by the fixed installations for the circuit downstream. |
Palavras e frases frequentes
alternating current applied auxiliary switch breaking capacity checked by inspection clamping clearances and creepage closed position Compliance is checked comply conditional short-circuit current connected correct operation creepage distances current protection plug current-carrying d.c. component dependent on line disruptive discharge earthing circuit earthing terminal Electrical Electromagnetic Compatibility fault current flexible cable GB/T impulse voltage influencing quantity insulating material line voltage measured minimum non-rewirable PRCDs normal Note Number of Samples operating means Plugs and Socket-outlets pole polyvinyl chloride portable socket-outlet PRCD under test PRCDs classified according PRCDs functionally dependent Preferred Values pulsating direct current rated current rated voltage relevant requirements Residual Current Devices residual current protection residual operating current residual pulsating direct residual short-circuit current Resistance resistor rewirable PRCDs SCPD screw thread specified conditions specified in Table Standard values supply switch S₁ temperature rise test circuit test conditions test current test device Test Sequences thermoplastic torque Verification wire